Mathematical Model of the Activated Sludge Concentration Measuring Channel Using an Optical Device
Litsenziya: cc-by
Annotatsiya
Efficiency of biological wastewater treatment processes largely depends on accurate monitoring of activated sludge concentration which is one of the key technological parameters of treatment facilities. Use of automated optical measurement systems makes it possible to improve monitoring accuracy and enhance process control efficiency in wastewater treatment plants. Aim of this study was to develop and investigate a mathematical model of an activated sludge concentration measuring channel based on the turbidimetric measurement method. This paper examines features of a developed mathematical model for activated sludge concentration measuring channel using an optical method based on turbidimetry principles. An analysis of the interaction processes between optical radiation and a wastewater multicomponent dispersed medium is carried out, taking into account absorption, scattering, and reflection of the light flux. A mathematical model based on the Lambert–Beer–Bouguer law has been developed. The model establishes a functional relationship between the concentration of activated sludge and the output electrical signal of the photodetector device. An approach is proposed for determining the level of activated sludge sediment in a secondary clarifier by analyzing the ratio of signals from adjacent photodetectors. To study characteristics of the measuring device a simulation model was developed in the MATLAB Simulink environment allowing analysis of the influence of radiation power, measured layer thickness, and medium concentration on the system output signal. The simulation results showed an exponential type of changes in the photodetector output voltage depending on parameters of the measured medium, confirming the adequacy of the developed model and the possibility of its application for design of automated control systems for wastewater treatment processes.
Hali tarjima qilinmagan