Bob

Increasing the Strength of Casting Parts of Agricultural Machinery Made of Aluminum Alloys under the Influence of Modifying Elements

Tursunbaev SarvarTashkent State Technical University , Tashkent , 100095 , UzbekistanAzizakhon TurakhujaevaTashkent State Technical University , Tashkent , 100095 , UzbekistanMukhayyokhon SaidovaTashkent State Technical University , Tashkent , 100095 , UzbekistanHasanova SurayyoTashkent State Technical University , Tashkent , 100095 , UzbekistanNargiza NazarovaTashkent State Technical University , Tashkent , 100095 , Uzbekistan

2026en

Ochiq kirishOltin

Litsenziya: cc-by-nc

ABI

Annotatsiya

Currently, aluminum alloys are widely used in the production of agricultural machinery parts.This article discusses the technology of increasing the tensile strength of aluminum alloys under the influence of various modifying elements.Samples were cast and tested.The studies were conducted on aluminum-copper and aluminum-magnesium alloys from aluminum alloys.As a result of the tests, the tensile strength of aluminum alloys was increased by 5%-7%.Based on the results obtained, a graph was constructed showing the dependence of the number of modifying elements on the tensile strength.At the end of the article, the authors present their conclusions based on the results of the studies.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.2991/978-94-6239-666-1_4

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba