Bob

Theoretical Study of the Width and Height of the Feeding Window in Livestock Farming

D KhudaynazarovYangiyer Branch of Tashkent Institute of Chemical Technology , Tinchlik street , 1 , Yangiyer city , Sirdarya , UzbekistanSardor KhudoyorovTashkent State Technical University , university str. 2 , Tashkent 100095 , UzbekistanF U KarshievFeruza MukumovaTermez State University , 43 , Barkamol avlod str. , Termiz , 190111 , UzbekistanAbdujalil SangirovYangiyer Branch of Tashkent Institute of Chemical Technology , Tinchlik street , 1 , Yangiyer city , Sirdarya , Uzbekistan

2026en

Ochiq kirishOltin

Litsenziya: cc-by-nc

ABI

Annotatsiya

The analysis of the technologies that grind, mix and distribute feed to livestock for livestock farms in the world today showed that the existing techniques are designed for livestock farms with a large production volume, so it is inconvenient to use them in small livestock farms.In addition, their metal capacity and energy consumption are high.For this reason, a device for distributing small-sized coarse feed was developed for small livestock farms.According to the conducted studies, the uniform distribution of nutrients of the developed spreading device largely depends on the height and width of the device's discharge window.Therefore, in the article, the height and width of the discharge window of the feed distribution device were theoretically studied

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.2991/978-94-6239-666-1_66

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba