Bob

Study of the Dependence of the Rotor of a Small Size Feed Distribution Device on the Number of Rotations and the Number of Blades

D KhudaynazarovTashkent State Technical University , Tashkent , UzbekistanYusuf AxmedjanovTashkent State Technical University , Tashkent , UzbekistanFotima JamolovaYangiyer Branch of Tashkent Institute of Chemical Technology , Sirdarya , UzbekistanShokir TursunovTermez state university , Termez , 190111 , UzbekistanOdil ToshbekovTermez state university , Termez , 190111 , Uzbekistan

2026en

Ochiq kirishOltin

Litsenziya: cc-by-nc

ABI

Annotatsiya

According to the analysis, it was found that 85 percent of the cattle and poultry in livestock are raised on family farms, private and peasant farms, and due to the lack of small-scale devices used for distributing feed for these farms, feed distribution is laborintensive and performed manually.Taking into account the above, a small-scale innovative feed distribution device was developed for small livestock farms with 20-30 head of cattle.The results of the research were determined based on the requirements of family farms, private and peasant farms, and small livestock farms.According to the identified research analysis, the main indicators of the feed spreading device and its technological scheme were developed.The effect of the height and width of the feed pouring window of the developed feed distribution device on the quality of feed distribution was studied in the research.The quality of distribution of coarse feed largely depends on the number of blades and the number of revolutions of the rotor.Taking this into account, based on the performance and size of the spreading device specified in the initial requirements and specifications, 1, 2, 3 and 4 shovels were prepared.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.2991/978-94-6239-666-1_65

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba