Asosiy kontentga oʻtish
Maqola

Synthesis of Nanostructured BaTaO<sub>2</sub>N Thin Films as Photoanodes for Solar Water Splitting

Chizhong WangDepartment of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, 113-8656 Tokyo, JapanTakashi HisatomiDepartment of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, 113-8656 Tokyo, JapanTsutomu MinegishiDepartment of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, 113-8656 Tokyo, JapanQian WangDepartment of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, 113-8656 Tokyo, JapanMiao ZhongJapan Technological Research Association of Artificial Photosynthetic Chemical Process (ARPChem), 5-1-5 Kashiwanoha, Kashiwa-shi, 277-8589 Chiba, JapanMasao KatayamaJapan Technological Research Association of Artificial Photosynthetic Chemical Process (ARPChem), 5-1-5 Kashiwanoha, Kashiwa-shi, 277-8589 Chiba, JapanJun KubotaDepartment of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, 113-8656 Tokyo, JapanKazunari DomenDepartment of Chemical System Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, 113-8656 Tokyo, Japan
2016en

Ochiq kirish: yoʻq

ABI

Annotatsiya

Synthesis of nanostructured BaTaO2N thin films on metallic Ta substrates, and their application as photoanodes for solar-driven photoelectrochemical water oxidation were studied. Ba5Ta4O15 nanosheets vertically grown on Ta substrates by a hydrothermal process were converted into perovskite BaTaO2N with a branching nanostructure by thermal nitridation under an ammonia gas flow. The crystal quality and photoelectrochemical properties of the BaTaO2N thin films were found to improve with increasing nitridation temperature up to 1000 °C. A Ta4N5 interfacial layer was formed between the BaTaO2N thin film and the Ta substrate. Under simulated AM 1.5G light, the BaTaO2N electrode generated a photoanodic current, although it rapidly decreased due to photo-oxidative corrosion. The degradation of the BaTaO2N electrode could be alleviated by the deposition of a cobalt phosphate layer on its surface. The modified electrode maintained a photoanodic current of 0.75 mA cm–2 at 1.23 V versus the reversible hydrogen electrode with a Faradaic efficiency of almost unity.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

4 ta iqtibos0 ta foydalanilgan manba