Asosiy kontentga oʻtish
Maqola

Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite

Michael McAllisterDepartment of Chemical Engineering, Department of Chemistry, and Princeton Institute for the Science and Technology of Materials, Princeton University, Princeton, New Jersey 08544, and Sandia National Laboratories, Albuquerque, New Mexico 87185Je-Luen LiDepartment of Chemical Engineering, Department of Chemistry, and Princeton Institute for the Science and Technology of Materials, Princeton University, Princeton, New Jersey 08544, and Sandia National Laboratories, Albuquerque, New Mexico 87185Douglas H. AdamsonDepartment of Chemical Engineering, Department of Chemistry, and Princeton Institute for the Science and Technology of Materials, Princeton University, Princeton, New Jersey 08544, and Sandia National Laboratories, Albuquerque, New Mexico 87185Hannes C. SchnieppSandia National LaboratoriesAhmed AbdalaSandia National LaboratoriesJun LiuSandia National LaboratoriesMargarita Herrera‐AlonsoSandia National LaboratoriesDavid L. MiliusSandia National LaboratoriesRoberto CarSandia National LaboratoriesRobert K. Prud’hommeSandia National Laboratoriesİlhan A. AksaySandia National Laboratories
2007en

Ochiq kirish: yoʻq

ABI

Annotatsiya

A detailed analysis of the thermal expansion mechanism of graphite oxide to produce functionalized graphene sheets is provided. Exfoliation takes place when the decomposition rate of the epoxy and hydroxyl sites of graphite oxide exceeds the diffusion rate of the evolved gases, thus yielding pressures that exceed the van der Waals forces holding the graphene sheets together. A comparison of the Arrhenius dependence of the reaction rate against the calculated diffusion coefficient based on Knudsen diffusion suggests a critical temperature of 550 °C which must be exceeded for exfoliation to occur. As a result of their wrinkled nature, the functionalized and defective graphene sheets do not collapse back to graphite oxide but are highly agglomerated. After dispersion by ultrasonication in appropriate solvents, statistical analysis by atomic force microscopy shows that 80% of the observed flakes are single sheets.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

7 ta iqtibos0 ta foydalanilgan manba