Asosiy kontentga oʻtish
Boshqa

Optimization of operating parameters in pneumatic flotation of refractory gold-sulfide ores

Kuvondik SANAKULOVJSC Navoi Mining and Metallurgy Co. (Uzbekistan)Victor ErmakovNavoi State University of Mining and Technologies (Uzbekistan)
2026

Ochiq kirish: yoʻq

ABI

Annotatsiya

The efficiency of flotation in processing refractory gold-sulfide ores is strongly influenced by hydrodynamic conditions and gas dispersion characteristics. This study investigates the combined effect of three key operating parameters - pulp recirculation rate, air-to-pulp ratio, and froth depth - on the performance of pneumatic flotation in a Jameson Cell L500 under industrial conditions. A full factorial experimental design comprising 36 tests was implemented using flotation tailings from the Kokpatas and Daugyztau deposits. The results demonstrate a pronounced nonlinear dependence of separation efficiency on operating conditions, with values ranging from 0.7 to 21.8. It was found that optimal flotation performance is achieved within a limited operating region defined by a medium recirculation control setting (16mm), a reduced downcomer vacuum level (−20kPa), and a medium froth depth (~250mm). Under these conditions, a balance between flotation kinetics and selectivity is established, minimizing gangue entrainment while maintaining recovery. The study confirms that maximizing individual parameters does not improve performance; instead, coordinated adjustment is required. The findings provide industrial validation of optimal operating regimes and offer a practical framework for improving flotation efficiency in the processing of refractory ores.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba