Experimental investigation of heat transfer between a gas-solid fluidized bed and an immersed coil
Litsenziya: cc-by
Annotatsiya
This study experimentally investigates heat transfer between a gas-solid fluidized bed and an immersed coil. The effects of fluidizing-air velocity, particle size, and particle properties on the heat transfer coefficient were examined using gravel particles and spherical glass beads of different size fractions. The copper-coil surface temperature was measured directly, while the transferred heat was determined from heat balances for the air and cooling-water circuits. The discrepancy between the independently calculated heat-flow values did not exceed 3%. The results show that the heat transfer coefficient increases sharply after the onset of fluidization and then rises more gradually with increasing air velocity. This behavior is associated with stronger gas-phase turbulence, higher relative velocities between the gas and particles, and thinning of the thermal boundary layer near the coil surface. At excessive air velocities, bed expansion reduces the particle concentration near the surface and may decrease the heat transfer coefficient. Within the investigated range, particle size and density had a secondary effect compared with air velocity. The fluidized granular bed provided substantially higher heat transfer than single-phase gas flow. The results can support the design and optimization of energy-efficient fluidized-bed heat exchangers.
Hali tarjima qilinmagan