Asosiy kontentga oʻtish
Boshqa

Computational analysis of heat transfer characteristics in a counterflow heat exchanger using H 2 O-TO 2 nanofluid

Erkin RustamovAsia International UniversityMekhriniso AtoevaBukhara State UniversityZukhra ObidovaGuliston State UniversityIstodjon RakhmatovSamarkand State Medical UniversityGulshod XasanovaBukhara State Pedagogical InstituteElmurod SalomovTashkent State Agrarian UniversitySwati SharmaSchool of Engineering and Technology (SET), CGC University
2026
ABI

Annotatsiya

Using H 2 O–TiO 2 as the working fluid, the thermal performance of a counterflow double-tube heat exchanger was numerically investigated. The investigation was performed by employing the finite element method (FEM) using COMSOL Multiphysics to analyze the flow and thermal characteristics of the fluid flow in the turbulent state with the application of realizable k–ε turbulence model. Two concentrations of nanofluid were used (5 vol% TiO 2 and 10 vol% TiO 2 ) and comparisons were made to water as a baseline across a range of Reynolds numbers for both the inner (35 000-85 000) and outer fluids (10 000-30 000). The thermophysical properties, namely density, heat capacity, thermal conductivity, and dynamic viscosity, of the nanofluid were taken into account in the single-phase model of the nanofluid which was developed based on the Maxwell model and Brinkman model, thereby simulating the behaviour of the nanofluid as accurately as possible. According to measurement results, it was evident that the presence of TiO 2 in water results in a significant increase in the heat transfer efficiency of the working fluid, where the nanofluid containing 10 vol% TiO 2 has a Nusselt number which increases by as much as 38% in this case, as well as a heat transfer coefficient which increases by 45% when compared to water at the same Reynolds number.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar