Comparative Analysis of Thermal Energy Storage with Branched Fin Structures Using a Numerical Method
Litsenziya: cc-by
Annotatsiya
The main goal of this research is to numerically analyse the thermal energy storage system using a phase change material (PCM) and extending branched fins as the method investigated in this thesis, including the design of two different configurations to the branched fin; a conventional branched radial fin and an extended multi-branched fin that would be used for heat transfer through the TES system. A two-dimensional transient model was developed using COMSOL Multiphysics to represent the thermal performance of the TES system during charging of the TES, the inlet temperature to the TES was set at 20°C and the heating fluid in the central tube at 80°C while the phase change material had a melting point at 60°C, the distribution of temperature, melting fraction and temporal behaviour of each of the PCMs were also analysed. The results illustrate the increase in heat transfer rate when using branched fins, as well as the rate of melting of PCMs, and show that the configuration with extended multi-branch fins provided better thermal results than the configuration with typical branched radial fins, thus decreasing the rate of melting of the phase change material and providing a more consistent temperature distribution than the use of typical branched radial fins. The results provide insight into the importance of fin geometry for the increased performance of thermal energy storage systems that employ phase change materials.
Hali tarjima qilinmagan