Asosiy kontentga oʻtish
Boshqa

Scale Formation, Corrosion Product Deposition, and Enhanced Water Degassing in Thermal Power Plant Heat Transfer Systems: Mechanisms, Kinetics, and a Novel Iron-Scrap Deaerator Modification

Risbek YusupaliyevTashkent State Technical UniversityMukhammad Bobur RadjabovTashkent State Technical UniversityKhasan UmarbaevTashkent State Technical UniversityNargiza QurbonovaTashkent State Technical UniversityNurbek RakhimovKarshi State Technical UniversityNeha DhimanDepartment of Computer Science and Engineering, School of engineering and Technology, CGC University
2026en
Ochiq kirishOlmos

Litsenziya: cc-by

ABI

Annotatsiya

The major factors contributing to reduced efficiency and early failure of thermal power plant (TPP) equipment are scaling and corrosion product deposits on heat transfer surfaces. A mechanistic, thermodynamic, and kinetic analysis of scaling and corrosion processes will be presented, as well as an experimental demonstration of a novel, iron scrap reactive device installed within the de-aerating tank to enhance removal of dissolved gases. Inverse solubility of CaCO 3 , CaSO 4 , MgCO 3 , Mg(OH) 2 , CaSiO 3 , and MgSiO 3 has been characterised from 20 to 350 degrees C by means of solubility product (Ksp) analysis. Utilising a quantitative fuel consumption model, it has been found that for every 1 mm of CaCO 3 scaling, there is a corresponding increase in natural gas consumption of 2.8%, an increase of 7.8% at 5 mm scaling. Electrochemical corrosion mechanisms due to O 2 and CO 2 will be studied in detail with a thermodynamic and kinetic perspective. The iron scrap device utilises 12 competing heterogeneous reactions to chemically absorb dissolved O 2 and CO 2 prior to thermal expulsion, lowering dissolved O 2 by 19-20% and CO 2 by 17-18% when compared to conventional thermal de-aeration, while reducing hydrazine consumption by approximately 20%. As such, the combined thermal and chemical de-aeration strategy results in an annual net savings of $185,000-$210,000 per 100 MW unit, yielding a payback period of less than one month.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar