Asosiy kontentga oʻtish
Boshqa

System Integration of Resource-Saving Innovative Technologies Alongside Productivity Enhancement of Twin-Shaft Mixers

Makhsud K. BobojanovTashkent State Technical University named after Islam KarimovDauletbek RismukhamedovFurkat TuychievTashkent State Technical University named after Islam KarimovXamza RozmetovAlmalyk State Technical Institute
2026en
ABI

Annotatsiya

Abstract. The priority task of modern industrial energy is the system integration of resource-saving innovative technologies along with increased productivity. In this context, the problem of designing electromechanical complexes with high energy efficiency and digitally automating their control algorithms remains a key link in the global technological transformation. Two-shaft mixers play a major role in complex technological cycles of the chemical, metallurgical and construction industries, in particular, in the processes of homogenization of refractory and acid-resistant components. However, traditional electric drive systems with single-speed asynchronous motors used in practice have a high coefficient of inertia, which leads to irreversible energy dissipation in transient modes (start and deceleration). This, in turn, reduces the overall efficiency of the system and causes an exponential increase in operating costs. In order to extend the mechanical life of the equipment and optimize the technological regulations, it becomes necessary to introduce contactless switching devices with high functionality. Modernization of existing low-efficiency and inertial drives based on intelligently controlled contactless modules is evaluated as the optimal solution to minimize energy consumption, increase device life and ensure the stability of technological processes. Development and research of a two-speed asynchronous motor (DM) with a PPO for the electric drive of a two-shaft mixer providing a step start, precise stop and increased efficiency of the technological process.The following methods were applied in the work: electromagnetic calculation with the selection of optimal winding parameters for the analysis of DD with PPO at a pole pair ratio of 2:4; computer modeling in the ANSYS Maxwell software environment for magnetic field analysis; development of a contactless starting circuit for two-speed asynchronous motors; experimental studies of a prototype AIR180M8/4 motor with the acquisition of operating, mechanical and starting characteristics under production conditions.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba