Integrated mechanical characterization and microstructural evaluation of bamboo fiber reinforced epoxy composites using one-way ANOVA
Litsenziya: cc-by
Annotatsiya
Epoxy composites reinforced with bamboo fibers at loading levels of 10–50 wt% were manufactured to examine the effect of fiber content on their mechanical behaviour and microstructural features. The fabricated composites were characterized through tensile, flexural, hardness, and impact tests, followed by scanning electron microscopy (SEM) to examine fracture morphology and one-way analysis of variance (ANOVA) to determine the statistical significance of fiber loading. The results revealed that composite performance depended strongly on the amount of bamboo fiber, with the best overall properties obtained at 30 wt% reinforcement. At this optimum composition, the tensile strength increased from 38 MPa to 65 MPa, flexural strength improved from 55 MPa to 85 MPa, Young's modulus reached 3.5 GPa, flexural modulus increased to 3.8 GPa, hardness attained 82 Shore D, and impact strength rose from 12 to 24 kJ/m 2 . Further increases in fiber content resulted in reduced mechanical performance because excessive reinforcement promoted fiber clustering, incomplete resin wetting, interfacial separation, and void formation. SEM examination showed a homogeneous fiber distribution and effective fiber–matrix bonding at the optimum composition, whereas composites containing higher fiber fractions exhibited noticeable defects that acted as crack initiation sites. Statistical analysis confirmed that bamboo fiber loading had a significant influence on all evaluated mechanical properties (p < 0.05). Overall, the study identifies 30 wt% bamboo fiber as the most effective reinforcement level for producing epoxy composites with an optimal balance of strength, stiffness, hardness, and impact resistance, demonstrating their potential for lightweight and environmentally sustainable structural applications. Unlike previous studies that primarily focused on mechanical characterization, the present work integrates systematic optimization of bamboo fiber loading, SEM-based microstructural analysis, and one-way ANOVA to establish statistically validated relationships between microstructure and the mechanical performance of bamboo fiber reinforced epoxy composites.
Hali tarjima qilinmagan