Asosiy kontentga oʻtish
Maqola

Features of the structural state and mechanical properties of ZrN and Zr(Ti)-Si-N coatings obtained by ion-plasma deposition technique

A. D. PogrebnyakSumy National Agrarian University, 40021, Sumy, UkraineО. В. СобольSumy Institute of Surface Modification, 40030, Sumy, UkraineВ. М. БересневSumy Institute of Surface Modification, 40030, Sumy, UkraineП. В. ТурбінKharkiv Institute of Physics and TechnologyС. Н. ДубBakul Institute for Superhard Materials, National Academy of Sciences of Ukraine, 04074, Kiev, UkraineГ. В. КірікSumy National Agrarian University, 40021, Sumy, UkraineA.E. DmitrenkoV. Bakul Institute for Superhard Materials
2009en

Ochiq kirish: yoʻq

ABI

Annotatsiya

The possibility of obtaining hard nanocrystalline coatings using vacuum-arc deposition in a high-frequency discharge stimulated regime has been studied. Condensates of the Zr(Ti)-Si-N system obtained by this method contain ZrN and TiN crystalline grains. These grains exhibit a compressive strain of about −1.1% in the film growth plane, which corresponds to compressive stresses up to about 3.5 GPa in the film-substrate system. The results of nanoindentation show evidence for a strong inhomogeneity of the coatings, in which regions possessing a hardness of 29–30 GPa alternate with those where the hardness exceeds 45–47 GPa. This pattern agrees with a two-phase model based on the structural data, according to which the condensed material consists of less hard ZrN grains and harder TiN grains.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

3 ta iqtibos0 ta foydalanilgan manba