Asosiy kontentga oʻtish
Maqola

High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys

Bed PoudelLaboratory of Solid State Microstructures and Department of Physics, Nanjing University, ChinaQing HaoDepartment of Physics, Boston College, Chestnut Hill, MA 02467, USAYi MaDepartment of Physics, Boston College, Chestnut Hill, MA 02467, USAYucheng LanDepartment of Physics and Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA 02139, USAAustin J. MinnichDepartment of Physics, Boston College, Chestnut Hill, MA 02467, USABo YuDepartment of Mechanical Engineering, Massachusetts Institute of Technology (MIT), Cambridge, MA 02139, USAXiao YanDepartment of Physics and Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA 02139, USADezhi WangDepartment of Physics and Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA 02139, USAAndrew MutoDepartment of Physics and Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA 02139, USADaryoosh VashaeeDepartment of Mechanical Engineering, Massachusetts Institute of Technology (MIT), Cambridge, MA 02139, USAXiaoyuan ChenDepartment of Physics, Boston College, Chestnut Hill, MA 02467, USAJun‐Ming LiuDepartment of Physics and Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA 02139, USAM. S. DresselhausDepartment of Mechanical Engineering, Massachusetts Institute of Technology (MIT), Cambridge, MA 02139, USAGang ChenGMZ Energy, Incorporated, 12A Hawthorn Street, Newton, MA 02458, USAZhifeng RenDepartment of Physics and Department of Electrical Engineering and Computer Science, MIT, Cambridge, MA 02139, USA
2008en

Ochiq kirish: yoʻq

ABI

Annotatsiya

The dimensionless thermoelectric figure of merit (ZT) in bismuth antimony telluride (BiSbTe) bulk alloys has remained around 1 for more than 50 years. We show that a peak ZT of 1.4 at 100 degrees C can be achieved in a p-type nanocrystalline BiSbTe bulk alloy. These nanocrystalline bulk materials were made by hot pressing nanopowders that were ball-milled from crystalline ingots under inert conditions. Electrical transport measurements, coupled with microstructure studies and modeling, show that the ZT improvement is the result of low thermal conductivity caused by the increased phonon scattering by grain boundaries and defects. More importantly, ZT is about 1.2 at room temperature and 0.8 at 250 degrees C, which makes these materials useful for cooling and power generation. Cooling devices that use these materials have produced high-temperature differences of 86 degrees , 106 degrees , and 119 degrees C with hot-side temperatures set at 50 degrees, 100 degrees, and 150 degrees C, respectively. This discovery sets the stage for use of a new nanocomposite approach in developing high-performance low-cost bulk thermoelectric materials.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

6 ta iqtibos0 ta foydalanilgan manba