Asosiy kontentga oʻtish
Maqola

Study on the development of a machine to prepare the soil for cotton sowing on ridges

F MamatovKarshi branch of Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, 180119, Karshi, UzbekistanBakhadir MirzaevTashkent Institute of Irrigation and Agricultural Mechanization Engineers, 100000, Tashkent, UzbekistanSanjar ToshtemirovKarshi State Technical UniversityObid HamroyevKarshi Engineering Economic Institute, 180100, Karshi, UzbekistanT RazzaqovKarshi Engineering Economic Institute, 180100, Karshi, UzbekistanI AvazovTashkent Institute of Irrigation and Agricultural Mechanization Engineers, 100000, Tashkent, Uzbekistan
ABI

Annotatsiya

Abstract The aim of this paper is to create a combined machine for planning the soil for sowing cotton on the edges. A total for the execution of the innovation of planning the soil for sowing cotton on the edges was developed, which comprises of a dump deep-dredger with a slanted rack and a comb-maker. The essential standards and strategies of classical mechanics, numerical examination and measurements were utilized in this paper. The plan conspire of the combined unit is advocated. The following results were obtained from the outcomes of multivariate tests set up: the width of the ripper within the extend of 10.5-11.03 cm, the disintegrating point of 27°, the point of establishment of the plowshare edge to the heading of movement of 31°. The arrangement of edges of the desired degree with negligible vitality utilization is given with a width and length of the deep-dredger bit, separately, of 5 and 20 cm, edge hold width of 21 cm, the length of its wing within the run of 47-49 cm, and a least longitudinal.

Hali tarjima qilinmagan

Mavzular

Identifikatorlar

Iqtiboslar va manbalar