Asosiy kontentga oʻtish
Maqola

Electrochemical sensing of Pb(II) and Cd(II) in decorative material of wood panel using nano-cellulose paper-based electrode modified using Graphene/Multi-walled Carbon Nanotubes/Bismuth film

Hui WangResearch Institute of Wood IndustryJunfeng WangGuanxi Zhuang Autonomous Region Forestry Research Institute, Nanning 530002, ChinaGang LiuKey Laboratory of Modern Precision Agriculture System Integration Research, Ministry of Education and Key Laboratory of Agricultural Information Acquisition Technology, Ministry of Agriculture, China Agricultural University, Beijing 100083, ChinaZhankuan ZhangResearch Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China;Xiaopeng HouResearch Institute of Wood Industry
2019en
Ochiq kirishOltin

Litsenziya: cc-by-nc-nd

ABI

Annotatsiya

The yield of decorative material of wood panel is unceasingly rising with the increasing output of the wood panel. Parts of decorative materials contains soluble heavy metals, which will probably pollute the environment. To monitor the contaminations of Cd(II) and Pb(II), nanocellulose paper was used as the substrate, a room temperature ionic liquid was applied as a conductive binder to improve the conductivity, and a nanocomposite of graphene/multi-walled carbon nanotubes (G-MWNTs) was modified the electrode’ surface to increase the specific surface area. The characteristics of the paperbased electrode (PBE) before and after functionalized with G-MWNTs were investigated by scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Moreover, bismuth film was electroplated on the G-MWNTs/PBE in-situ to improve the sensitivity for Cd(II) and Pb(II). The current responses of Cd(II) and Pb(II) were activated on Bi/G-MWNTs/PEB using square wave stripping voltammetry. Under the optimized paramters, the current responses of Cd(II) and Pb(II) were positive linear relation with a wide concentration range from 1 µg/L to 50 µg/L with the limits of detection were 0.2 µg/L (S/N=3). Finally, the Bi/G-MWNTs/PBE was successfully used as a useful probe to determine the Cd(II) and Pb(II) in decorative material of wood-based panel with good results.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar