Influence of cotton drying processes on raw material components: a basis for real-time optical monitoring and control
Ochiq kirish: yoʻq
Annotatsiya
This scientific article is devoted to the analysis of the influence of the drying regime on the moisture content and heating temperature of material components during primary processing of raw cotton. The research is focused on the mathematical modeling of thermal processes to improve product quality by optimizing the moisture content and heating temperature of cotton components obtained from the experiments. The model is based on full factorial experiments conducted under production conditions. The study enables the analysis of the impact of productivity along the technological flow, the drying agent, and the moisture content of raw cotton (at minimum and maximum values) on the moisture changes of fiber and seeds, as well as on the efficiency of cleaning and ginning processes, with special attention paid to raw materials with low and high moisture levels. Based on the developed mathematical models, it becomes possible to predict the processes of producing high-quality fiber and seeds by achieving the optimal moisture-thermal state of the fiber depending on the initial moisture content of raw cotton and the productivity of the technological flow. This also creates opportunities for automating cotton ginning enterprises. This paper also talks about the problems with using regular contact-based sensors to keep an eye on these important parameters in real time. To tackle this issue, we suggest a conceptual framework for an optical monitoring system that uses near-infrared (NIR) spectroscopy and infrared (IR) thermometry. The regression models derived from experiments in this study can be used as a strong calibration basis for non-destructive photonic sensors. This will make it possible for intelligent, closed-loop process control in the textile industry.
Hali tarjima qilinmagan