Correction: Effect of particle size reduction on the physicochemical and mechanical properties of conventional glass ionomer cement
Litsenziya: cc-by
Annotatsiya
A correction refers to a change to their article that the author wishes to publish after publication. The publication of this article is subject to Frontiers' editorial approval.Instructions:• Please read through all the templates before choosing • Pick the most relevant text template(s) from the following page and delete all others.• Edit the text as necessary, ensuring that the original incorrect text is included for the record, please see the below. • Please do not use any extra formatting when editing the templates, and only modify the red text unless absolutely necessary • Submit to Frontiers following the instructions on this page.When the original text contained incorrect information, to preserve the scientific record, please include that text when editing the below templates. For example:There was a mistake in the Funding statement, an incorrect number was used.The correct number is "2015C03Bd051.". The publisher apologizes for this mistake.The original version of this article has been updated. "The diametral tensile strength (DTS) analysis of the tested groups is presented in Figure 5B. Among the evaluated materials, Group C (hybrid) exhibited the highest DTS value (8.4 MPa), which was statistically significant compared to all other groups (p < 0.05). Group D (control) exhibited a moderate DTS of 6.8 MPa, significantly higher than that of Group A (submicron) and Group B (nano), which demonstrated values of 6.2 MPa and 5.5 MPa, respectively. According to Tukey's HSD test, different lowercase letters indicate statistically significant differences among the groups (p < 0.05), confirming that the hybrid composition notably enhanced the tensile strength performance compared to the submicron and nano formulations."This was a typographical error and does not affect the data, analyses, results, or conclusions of the study. The original version of this article has been updated.End of template. If you would like to request a correction for a reason not seen here, please contact the journal's editorial office.
Hali tarjima qilinmagan