Asosiy kontentga oʻtish
Preprint

WEAR REDUCTION IN SLURRY PUMPS: OPERATIONAL PARAMETERS CONTROL STRATEGY

Oybek IshnazarovInstitute of Energy Problems of the Academy of Sciences of the Republic of UzbekistanSergey KakharovAlmalyk Branch of National University of Science and Technology "MISIS"Shakhrizod IsmoilovAlmalyk Branch of National University of Science and Technology "MISIS"SERGEY SVIRIDOVAlmalyk Branch of National University of Science and Technology "MISIS"
2026en
ABI

Annotatsiya

Abstract The article investigates methods for improving the wear resistance of slurry pumps through optimisation of operating parameters. An analysis is presented of the main wear mechanisms: abrasive wear (60–75% of material loss, following E∝C_s^1.7 v^2.8), cavitation erosion, corrosion erosion synergy (S = 180–240% at pH < 2.0), and vibration fatigue. A Model Predictive Control (MPC) methodology is proposed, integrating real time slurry monitoring with dynamic regulation of flow velocity, pressure, and start stop cycles. Industrial tests on GRAT 400/40 pumps handling copper slurries (pH 1.8, 34% solids, 55°C) demonstrate: 40% increase in mean time between repairs (MTBR) from 987 ± 156 to 1523 ± 89 hours (corresponding approximately to 830–1140 h and 1430–1610 h ranges), 44% reduction in downtime, and 45.8% decrease in wear rate (from 0.72 to 0.39 mm/1000 h). The findings enable significant reduction of operational costs and improvement of pumping system reliability.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar