Asosiy kontentga oʻtish
AkademIndex

Mahsulotlar

Ishlab chiquvchilar uchun

AkademBasetez oradaEkotizim uchun ochiq API
Lotin
← Ishga qaytish

Ushbu ish iqtibos qilgan ishlar

49 ta ish

Ish: Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing

  1. The Role and Prospects of Rare Earth Metals in the Development of Physical-Mechanical Characteristics and Applications of Deformable Aluminum Alloys

    Jury A. Gorbunov

    Maqola20159 iqtibos
    ABI

  2. Critical Assessment 36: Assessing differences between the use of cerium and scandium in aluminium alloying

    Frank Czerwiński

    Maqola20199 iqtibos
    ABI

  3. Comparative analysis of alloying additives as applied to the production of heat-resistant aluminum-base wires

    Н. А. Белов, A. N. Alabin, A. R. Teleuova

    Maqola20126 iqtibos
    ABI

  4. Mechanisms for Ce-induced remarkable improvement of conductivity in Al alloys

    Hengcheng Liao, Ye Liu, Changlüe Lü +1

    Maqola20165 iqtibos
    ABI

  5. Structure and Properties of Al-0.6%Zr-0.4%Fe-0.4%Si (wt.%) Wire Alloy Manufactured by Electromagnetic Casting

    Н. А. Белов, Н. О. Короткова, Т. К. Akopyan +1

    Maqola20195 iqtibos
    ABI

  6. A Review of the Twin-roll Casting Process for Complex Section Products

    Ce Ji, Huagui Huang

    Sharh maqola20205 iqtibos
    ABI

  7. Mechanical and electrical properties of an ultrafine grained Al–8.5 wt. % RE (RE = 5.4 wt.% Ce, 3.1 wt.% La) alloy processed by severe plastic deformation

    M. Yu. Murashkin, I. Sabirov, A. E. Medvedev +4

    Maqola20154 iqtibos
    ABI

  8. The improved effects by the combinative addition of lanthanum and samarium on the microstructures and the tensile properties of high-pressure die-cast Mg–4Al-based alloy

    Qiang Yang, Fanqiang Bu, Fanzhi Meng +5

    Maqola20154 iqtibos
    ABI

  9. Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys

    Tao Lü, Pan Ye, Jili Wu +2

    Maqola20154 iqtibos
    ABI

  10. Effect of the Thermomechanical Processing on Microstructure and Properties of an Al-Ce Alloy

    Anna Mogucheva, Dmitry Zyabkin, Rustam Kaibyshev

    Maqola20124 iqtibos
    ABI

  11. Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy

    Wenming Jiang, Zitian Fan, Yu‐Cheng Dai +1

    Maqola20144 iqtibos
    ABI

  12. Effect of electromagnetic field on microstructure and macrosegregation of flat ingot of 2524 aluminium alloy

    Yubo Zuo, Jianzhong Cui, Dan MOU +3

    Maqola20144 iqtibos
    ABI

  13. Effects of La addition on the elevated temperature properties of the casting Al–Cu alloy

    Dongming Yao, Yumei Xia, Feng Qiu +1

    Maqola20104 iqtibos
    ABI

  14. Effects of La addition on the mechanical properties and thermal-resistant properties of Al–Mg–Si–Zr alloys based on AA 6201

    Wuhua Yuan, Zhenyu Liang, Chuanyang Zhang +1

    Maqola20114 iqtibos
    ABI

  15. Microstructure Evolution of Al-0.35%Si-0.2%Mg-0.3%Ce Alloy During Hot Extrusion and Its Contributions to Performances

    Hengcheng Liao, Yuna Wu, Yongjin Wang

    Maqola20154 iqtibos
    ABI

  16. Effect of trace La addition on the microstructure and mechanical property of as-cast ADC12 Al-Alloy

    Xin Huang, Hong Yan

    Maqola20134 iqtibos
    ABI

  17. Computational-and-experimental evaluation of the implementation condition of combined rolling–pressing using the power balance method

    Н. Н. Загиров, Nikolay N. Dovzhenko, S. B. Sidelnikov +1

    Maqola20164 iqtibos
    ABI

  18. Microstructure evolution and mechanical properties of Al-La alloys with varying La contents

    Yang He, Jianhua Liu, Shengtao Qiu +3

    Maqola20174 iqtibos
    ABI

  19. Distinctive features of the structure and characteristics of long-length light gauge ingots from aluminium alloys, cast into electromagnetic crystallizer

    RPC “Magnetic Hydrodynamics”, Krasnoyarsk, Russia, A. A. Avdulov, Nikolay Sergeev +4

    Maqola20174 iqtibos
    ABI

  20. Application and Research Twin Roll Casting-Extruding Process for Production Longish Deformed Semi-Finished Products from Aluminum Alloys

    S. B. Sidelnikov, Roman Ilsurovich Galiev, Andrey Sergeevich Bersenev +1

    Maqola20184 iqtibos
    ABI

  21. Effect of Trace Elements La, Ti and Homogenization on Electrical Properties of Pure Aluminum

    Wei Feng, Jian Mao, Liu Chunfang +1

    Maqola20184 iqtibos
    ABI

  22. Effect of the eutectic Al-(Ce,La) phase morphology on microstructure, mechanical properties, electrical conductivity and heat resistance of Al-4.5(Ce,La) alloy after SPD and subsequent annealing

    A. E. Medvedev, M. Yu. Murashkin, Nariman A. Enikeev +4

    Maqola20194 iqtibos
    ABI

  23. Cerium in aluminum alloys

    Frank Czerwiński

    Maqola20194 iqtibos
    ABI

  24. Development and research of technology for producing electrotechnical wire from alloys of the Al – REM system, obtained with the application of combined machining methods

    S. B. Sidelnikov, Денис Сергеевич Ворошилов, М. В. Первухин +1

    Maqola20194 iqtibos
    ABI

  25. The difference of La and Ce as additives of electrical conductivity aluminum alloys

    Yuliang Zhang, Feng Wei, Jian Mao +1

    Maqola20194 iqtibos
    ABI