Determination of the outlet diameter of the spray tip of the universal sprayer
A A AkhmetovD U KambarovaTSTU named after I. Karimov, UzbekistanA I YuldashevR M Botirov“Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, 39, Street Kari Niyaziy, Tashkent, 100000, UzbekistanB Q Tulaganov“Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, 39, Street Kari Niyaziy, Tashkent, 100000, Uzbekistan
ABI
Annotatsiya
Abstract To eliminate the shortcomings of serial fan sprayers, the JV “Agrikhim” developed a universal sprayer that treats crops based on controlled airborne flows introduced simultaneously within ± 90 0 from the sprayer’s symmetry axis (a total of 180 0 ) around the entire perimeter of the treatment area the entire width of the machine. The obtained dependences and the nomogram built on their basis allow setting the required rate of application of the working solution at a given speed and diameter of the spray tip of the sprayer by adjusting the pressure when the working solution enters the spray tip.
Hali tarjima qilinmagan