The Characterization of Coatings Formed on As-Cast Al, Al–Si, and Al–Ca Aluminum Substrates by Plasma Electrolytic Oxidation

In this study, ceramic coatings were grown on the surface of as-cast aluminum alloys via plasma electrolytic oxidation (PEO). The effect of the Si- and Ca-alloying elements in aluminum on the growth process, morphology, composition, mechanical, and corrosion properties of the PEO coatings was investigated. Uniform coatings with a minimum number of defects were formed on the surfaces of Al–Ca alloys. Increasing the Si content in Al led to an increase in the bulk and surface porosity of the coatings. The α-Al2O3 phase mainly formed in the coatings synthesized on pure Al and Al–Ca alloys, while an increased amount of Si in Al alloys hindered the formation of the α-Al2O3 phase. The coatings had a microhardness of 660–1180 HV, which was 20–30 times higher than that of the original as-cast alloy. Moreover, the coating on the Al–Ca alloys had the highest peak hardness, which was probably caused by the formation of a greater amount of the α-Al2O3 phase. Electrochemical studies in 3.5% NaCl have shown that PEO coatings reduce the corrosion current density. Of all PEO-treated alloys, Al and Al1Ca have the lowest corrosion current density and hence the highest corrosion resistance due to the composition and uniformity of the coating.

Hali tarjima qilinmagan