Ushbu ish iqtibos qilgan ishlar

85 ta ish

Ish: Metrological Comparison of Available Methods to Correct Edge-Effect Local Plasticity in Instrumented Indentation Test

Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
W. C. Oliver, George M. Pharr
Maqola20046 iqtibos
ABI
Single-step calibration method for nano indentation testing machines
Maurizio Galetto, Gianfranco Genta, Giacomo Maculotti
Maqola20204 iqtibos
ABI
Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation
Yang‐Tse Cheng, Che-Min Cheng
Maqola19983 iqtibos
ABI
Nanoindentation: Measuring methods and applications
D.A. Lucca, Konrad Herrmann, M.J. Klopfstein
Maqola20103 iqtibos
ABI
Indentation size effects in crystalline materials: A law for strain gradient plasticity
William D. Nix, Huajian Gao
Maqola19983 iqtibos
ABI
A comparison of nanoindentation pile-up in bulk materials and thin films
Noushin Moharrami, S.J. Bull
Maqola20143 iqtibos
ABI
Uncertainty evaluation of indentation modulus in the nano-range: Contact stiffness contribution
Giulio Barbato, Gianfranco Genta, Roberto Cagliero +4
Maqola20173 iqtibos
ABI
Instrumented Indentation Test in the Nano-range: Performances Comparison of Testing Machines Calibration Methods
Maurizio Galetto, Giacomo Maculotti, Gianfranco Genta +2
Maqola20193 iqtibos
ABI
Germanium: A review of its US demand, uses, resources, chemistry, and separation technologies
Madhav Patel, Athanasios K. Karamalidis
Sharh maqola20213 iqtibos
ABI
High-Precision Calibration of Indenter Area Function and Instrument Compliance
T. Chudoba, Dieter Schwenk, Philipp Reinstädt +1
Maqola20223 iqtibos
ABI
Calibration of machine platform nonlinearity in Instrumented Indentation Test in the macro range
Jasurkhuja Kholkhujaev, Giacomo Maculotti, Gianfranco Genta +1
MaqolaMetal and Thin Film MechanicsPrecision Engineering20233 iqtibos
ABI
Electrode materials for lithium-ion batteries
Amit Kumar Mishra, Akansha Mehta, Soumen Basu +5
Maqola20182 iqtibos
ABI
Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
Giacomo Maculotti, Edoardo Goti, Gianfranco Genta +2
Maqola20212 iqtibos
ABI
Mapping of mechanical properties of WC–Co using nanoindentation
Håkan Engqvist, Urban Wiklund
Maqola20002 iqtibos
ABI
Indentation of self-similar indenters: An FEM-assisted energy-based analysis
Fabian Pöhl, S. Huth, W. Theisen
Maqola20142 iqtibos
ABI
Electrical resistance of metallic contacts on silicon and germanium during indentation
George M. Pharr, W. C. Oliver, Robert F. Cook +4
Maqola19922 iqtibos
ABI
Exploiting interactions between structure size and indentation size effects to determine the characteristic dimension of nano-structured materials by indentation
Xiaodong Hou, N.M. Jennett, Magdalena Parlińska‐Wojtan
Maqola20132 iqtibos
ABI
Investigations of new possibilities in the calibration of diamond hardness indenters geometry
Alessandro Germak, Claudio Origlia
Maqola20102 iqtibos
ABI
The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations
George M. Pharr, Erik G. Herbert, Yanfei Gao
Maqola20102 iqtibos
ABI
Correction of the hardness measurement for pile-up materials with a nano indentation machine
Moon Shik Park
Maqola20162 iqtibos
ABI
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano-range
Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +3
Maqola20182 iqtibos
ABI
Assessment of Heat Treatment Effect on AlSi10Mg by Selective Laser Melting through Indentation Testing
Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +1
Maqola20192 iqtibos
ABI
Metrological characteristics for the calibration of surface topography measuring instruments: a review
Richard Leach, Han Haitjema, Rong Su +1
Sharh maqola20202 iqtibos
ABI
Sarlavhasiz
Boshqa2 iqtibos
ABI
Sarlavhasiz
Boshqa1 iqtibos
ABI