Detection of vertical load on the base drive with a plug-in drive

When the disc plug is in operation, its straight line movement is considered important. The reason for this is that the plug bodies are angled, all pointing in the same direction, so they will attempt to rotate the plug during operation. To prevent this from happening, the plug incorporates a support disc which, by resting on the base formed by the end housing, ensures that the plug operates horizontally without tilting to the side, i.e. in a straight line movement. Based on this, it was found in theoretical studies that the vertical load applied to the disc connector depends on its parameters. According to the obtained expression, it was shown that the steepness of load on the support disc depends on its radius (diameter), depth of immersion in the bottom, thickness, thickness of the crucible, angles of sharpening and installation relative to the steepness, as well as friction and volume crushing coefficients of the ground.

Hali tarjima qilinmagan