Asosiy kontentga oʻtish
AkademIndex

Mahsulotlar

Ishlab chiquvchilar uchun

AkademBaseEkotizim uchun ochiq API
← Ishga qaytish

Ushbu ish iqtibos qilgan ishlar

31 ta ish

Ish: Simulation of combined rolling-extrusion process for round section billets in closed box caliber

  1. The Role and Prospects of Rare Earth Metals in the Development of Physical-Mechanical Characteristics and Applications of Deformable Aluminum Alloys

    Jury A. Gorbunov

    Maqola20159 iqtibos
    ABI

  2. Critical Assessment 36: Assessing differences between the use of cerium and scandium in aluminium alloying

    Frank Czerwiński

    Maqola20199 iqtibos
    ABI

  3. Comparative analysis of alloying additives as applied to the production of heat-resistant aluminum-base wires

    Н. А. Белов, A. N. Alabin, A. R. Teleuova

    Maqola20126 iqtibos
    ABI

  4. Mechanisms for Ce-induced remarkable improvement of conductivity in Al alloys

    Hengcheng Liao, Ye Liu, Changlüe Lü +1

    Maqola20165 iqtibos
    ABI

  5. Structure and Properties of Al-0.6%Zr-0.4%Fe-0.4%Si (wt.%) Wire Alloy Manufactured by Electromagnetic Casting

    Н. А. Белов, Н. О. Короткова, Т. К. Akopyan +1

    Maqola20195 iqtibos
    ABI

  6. A Review of the Twin-roll Casting Process for Complex Section Products

    Ce Ji, Huagui Huang

    Sharh maqola20205 iqtibos
    ABI

  7. Mechanical and electrical properties of an ultrafine grained Al–8.5 wt. % RE (RE = 5.4 wt.% Ce, 3.1 wt.% La) alloy processed by severe plastic deformation

    M. Yu. Murashkin, I. Sabirov, A. E. Medvedev +4

    Maqola20154 iqtibos
    ABI

  8. The improved effects by the combinative addition of lanthanum and samarium on the microstructures and the tensile properties of high-pressure die-cast Mg–4Al-based alloy

    Qiang Yang, Fanqiang Bu, Fanzhi Meng +5

    Maqola20154 iqtibos
    ABI

  9. Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys

    Tao Lü, Pan Ye, Jili Wu +2

    Maqola20154 iqtibos
    ABI

  10. Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy

    Wenming Jiang, Zitian Fan, Yu‐Cheng Dai +1

    Maqola20144 iqtibos
    ABI

  11. Effect of electromagnetic field on microstructure and macrosegregation of flat ingot of 2524 aluminium alloy

    Yubo Zuo, Jianzhong Cui, Dan MOU +3

    Maqola20144 iqtibos
    ABI

  12. Effects of La addition on the elevated temperature properties of the casting Al–Cu alloy

    Dongming Yao, Yumei Xia, Feng Qiu +1

    Maqola20104 iqtibos
    ABI

  13. Effects of La addition on the mechanical properties and thermal-resistant properties of Al–Mg–Si–Zr alloys based on AA 6201

    Wuhua Yuan, Zhenyu Liang, Chuanyang Zhang +1

    Maqola20114 iqtibos
    ABI

  14. Microstructure Evolution of Al-0.35%Si-0.2%Mg-0.3%Ce Alloy During Hot Extrusion and Its Contributions to Performances

    Hengcheng Liao, Yuna Wu, Yongjin Wang

    Maqola20154 iqtibos
    ABI

  15. Effect of trace La addition on the microstructure and mechanical property of as-cast ADC12 Al-Alloy

    Xin Huang, Hong Yan

    Maqola20134 iqtibos
    ABI

  16. Microstructure evolution and mechanical properties of Al-La alloys with varying La contents

    Yang He, Jianhua Liu, Shengtao Qiu +3

    Maqola20174 iqtibos
    ABI

  17. Distinctive features of the structure and characteristics of long-length light gauge ingots from aluminium alloys, cast into electromagnetic crystallizer

    RPC “Magnetic Hydrodynamics”, Krasnoyarsk, Russia, A. A. Avdulov, Nikolay Sergeev +4

    Maqola20174 iqtibos
    ABI

  18. Effect of Trace Elements La, Ti and Homogenization on Electrical Properties of Pure Aluminum

    Wei Feng, Jian Mao, Liu Chunfang +1

    Maqola20184 iqtibos
    ABI

  19. Effect of the eutectic Al-(Ce,La) phase morphology on microstructure, mechanical properties, electrical conductivity and heat resistance of Al-4.5(Ce,La) alloy after SPD and subsequent annealing

    A. E. Medvedev, M. Yu. Murashkin, Nariman A. Enikeev +4

    Maqola20194 iqtibos
    ABI

  20. Development and research of technology for producing electrotechnical wire from alloys of the Al – REM system, obtained with the application of combined machining methods

    S. B. Sidelnikov, Денис Сергеевич Ворошилов, М. В. Первухин +1

    Maqola20194 iqtibos
    ABI

  21. The difference of La and Ce as additives of electrical conductivity aluminum alloys

    Yuliang Zhang, Feng Wei, Jian Mao +1

    Maqola20194 iqtibos
    ABI

  22. The Effect of Addition of Ce and Sr on the Solidification Path of Al–8Si–2Cu Alloy

    V. Vijeesh, K. Narayan Prabhu

    Maqola20153 iqtibos
    ABI

  23. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity

    Р. З. Валиев, M. Yu. Murashkin, I. Sabirov

    Maqola20133 iqtibos
    ABI

  24. Effect of Ce addition on castability, mechanical properties and electric conductivity of Al–0.3Si–0.2Mg alloy

    Hengcheng Liao, Yaxuan Liu, Cunhao Lu +1

    Maqola20153 iqtibos
    ABI

  25. Influences of Annealing and Deformation on the High Temperature Internal Friction Spectra of Al-0.013%Wt Ce Alloy

    Xiao Hui Cao, Shou Jing Wang

    Maqola20113 iqtibos
    ABI