Maqola

Improvement of the parameters of the elastic coating of the crushing roller in the production of "Siro" yarn

Vokhid IsakulovTashkent Institute of Textile and Light Industry, Tashkent, UzbekistanNuriddin RoziboevTashkent Institute of Textile and Light Industry, Tashkent, UzbekistanSanjar YarashovTashkent Institute of Textile and Light Industry, Tashkent, UzbekistanAysulu SarsenbaevaTashkent Institute of Textile and Light Industry, Tashkent, UzbekistanAkmal KhusanovTashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan

AIP conference proceedingsjournal2024en

ABI

Annotatsiya

In this article, the formula for calculating the coefficient of uniformity in drafting the polyester fiber of the elastic coating of the crushing roller of the front drafting pair of the ring spinning machine in the production of "Siro" yarn with different components is determined. Graphs of the dependence of the coefficient of uniformity of the elastic coating of the crushing roller on polyester roving drafting on the diameter of cotton and polyester rovings were made. Formulas for determining friction forces with the surface of the crushing roller during the drafting of cotton and polyester rovings were developed. Graphs of dependence of friction coefficients of friction forces with the surfaces of the crushing roller of cotton and polyester rovings and the uniformity of the elastic coating of the crushing roller were obtained. It has been proven that the forces of friction with the crushing roller of cotton and polyester are equal to ensure the same elongation of cotton and polyester rovings, to ensure the production of "Siro" yarn with different components in the same plane.

Hali tarjima qilinmagan

Mavzular

Engineering and Agricultural Innovations

Identifikatorlar

DOI: 10.1063/5.0197840

Iqtiboslar va manbalar

0 ta iqtibos3 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar · Tez orada