A study of ternary Cu₂SnS₃ and Cu₃SnS₄ thin films prepared by sulfurizing stacked metal precursors

Thin films of Cu 2 SnS 3 and Cu 3 SnS 4 were grown by sulfurization of dc magnetron sputtered Sn–Cu metallic precursors in a S 2 atmosphere. Different maximum sulfurization temperatures were tested which allowed the study of the Cu 2 SnS 3 phase changes. For a temperature of 350 °C the films were composed of tetragonal ( I -42 m ) Cu 2 SnS 3 . The films sulfurized at a maximum temperature of 400 °C presented a cubic ( F -43 m ) Cu 2 SnS 3 phase. On increasing the temperature up to 520 °C, the Sn content of the layer decreased and orthorhombic ( Pmn 21) Cu 3 SnS 4 was formed. The phase identification and structural analysis were performed using x-ray diffraction (XRD) and electron backscattered diffraction (EBSD) analysis. Raman scattering analysis was also performed and a comparison with XRD and EBSD data allowed the assignment of peaks at 336 and 351 cm −1 for tetragonal Cu 2 SnS 3 , 303 and 355 cm −1 for cubic Cu 2 SnS 3 , and 318, 348 and 295 cm −1 for the Cu 3 SnS 4 phase. Compositional analysis was done using energy dispersive spectroscopy and induced coupled plasma analysis. Scanning electron microscopy was used to study the morphology of the layers. Transmittance and reflectance measurements permitted the estimation of absorbance and band gap. These ternary compounds present a high absorbance value close to 10 4 cm −1 . The estimated band gap energy was 1.35 eV for tetragonal ( I -42 m ) Cu 2 SnS 3 , 0.96 eV for cubic ( F -43 m ) Cu 2 SnS 3 and 1.60 eV for orthorhombic ( Pmn 21) Cu 3 SnS 4 . A hot point probe was used for the determination of semiconductor conductivity type. The results show that all the samples are p-type semiconductors. A four-point probe was used to obtain the resistivity of these samples. The resistivities for tetragonal Cu 2 SnS 3 , cubic Cu 2 SnS 3 and orthorhombic ( Pmn 21) Cu 3 SnS 4 are 4.59 × 10 −2 Ω cm, 1.26 × 10 −2 Ω cm, 7.40 × 10 −4 Ω cm, respectively.

Hali tarjima qilinmagan