Maqola

Effect of multi-pass friction stir processing on the microstructure evolution and corrosion behavior of ZrO2/AZ31 magnesium matrix composite

Ke QiaoSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaTing ZhangSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaKuaishe WangSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaShengnan YuanSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaLiqiang WangState Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, PR ChinaShanyong ChenSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaYuhao WangSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaKairui XueSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR ChinaWen WangSchool of Metallurgical Engineering National and Local Joint Engineering Research Center for Functional Materials Processing, Xi'an University of Architecture and Technology, Xi'an, 710055, PR China

2022en

ABI

Annotatsiya

Most of magnesium matrix composites processed by traditional technique have poor anti-corrosion and biological performance, because of uneven microstructure, especially for nonuniform distribution of reinforced particles. Friction stir processing (FSP) can be used for preparing magnesium matrix composites with refine grains and uniform distribution of reinforced particles. In this paper, multi-pass FSP is employed to fabricate the ZrO2 particles reinforced AZ31 magnesium composites. The results showed that the microstructure of the composites become more homogeneous with the increase of FSP pass. The grain size is refined from 10 μm of basal metal (BM) to 8.2 μm of two-pass FSP (FSP-2P) and 4.5 μm of four-pass FSP (FSP-4P), respectively. The ultimate tensile strength, yield strength and elongation of BM is 283 MPa, 137 MPa and 15.5%. The mechanical properties are improved with the increase of FSP pass. The ultimate tensile strength, yield strength and elongation of FSP-4P is 328 MPa, 160 MPa, and 11.5%, respectively. Moreover, the corrosion resistance is arranged in the following order: FSP-2P < BM < FSP-4P. The cell activity of FSP-4P is higher than that of FSP-2P sample, which is similar to BM.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.1016/j.jmrt.2022.02.127

Iqtiboslar va manbalar

4 ta iqtibos0 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar