Maqola

Experimental Investigation on Ultrasonic Vibration Assisted Turning of Sicp/Al Composites

Guojun Dong School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, ChinaHaijun Zhang Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang, ChinaMing Zhou School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, ChinaYuanjing Zhang School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, China

2012en

ABI

Annotatsiya

Abstract Particle-reinforced aluminium matrix composites are widely used in aerospace, automobile, and electronics industries. However, the high abrasiveness of their reinforcing constituents makes the turning of this kind of material difficult to carry out due to excessive tool wear and surface damage. In this work, ultrasonic vibration-assisted turning tests were carried out on aluminium alloy Al2024 reinforced with Vf = 45% SiC particles by using polycrystalline diamond (PCD) tools to investigate the effect of the tool geometries on the cutting force and the machined surface roughness. Experimental results show that tool rake angle and tool nose radius exert a considerable influence on the cutting force and machined surface integrity. A comparison of tool flank wear pattern between the conventional turning and the ultrasonic-assisted turning reveals that the tool wear reduced significantly during the ultrasonic vibration assisted turning. Keywords: CompositesForceMatrixMetalPCDRoughnessToolUltrasonicVibrationWear

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.1080/10426914.2012.709338

Iqtiboslar va manbalar

2 ta iqtibos0 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar