Asosiy kontentga oʻtish
AkademIndex

Mahsulotlar

Ishlab chiquvchilar uchun

AkademBaseEkotizim uchun ochiq API
Maqola

Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries

A. K. PadhiCenter for Materials Science and Engineering, The University of Texas at Austin, Austin, Texas 78712‐1063K.S. NanjundaswamyCenter for Materials Science and Engineering, The University of Texas at Austin, Austin, Texas 78712‐1063John B. GoodenoughCenter for Materials Science and Engineering, The University of Texas at Austin, Austin, Texas 78712‐1063
1997en
ABI

Annotatsiya

Reversible extraction of lithium from (triphylite) and insertion of lithium into at 3.5 V vs. lithium at 0.05 mA/cm2 shows this material to be an excellent candidate for the cathode of a low‐power, rechargeable lithium battery that is inexpensive, nontoxic, and environmentally benign. Electrochemical extraction was limited to ∼0.6 Li/formula unit; but even with this restriction the specific capacity is 100 to 110 mAh/g. Complete extraction of lithium was performed chemically; it gave a new phase, , isostructural with heterosite, . The framework of the ordered olivine is retained with minor displacive adjustments. Nevertheless the insertion/extraction reaction proceeds via a two‐phase process, and a reversible loss in capacity with increasing current density appears to be associated with a diffusion‐limited transfer of lithium across the two‐phase interface. Electrochemical extraction of lithium from isostructural (M = Mn, Co, or Ni) with an electrolyte was not possible; but successful extraction of lithium from was accomplished with maximum oxidation of the occurring at x = 0.5. The couple was oxidized first at 3.5 V followed by oxidation of the couple at 4.1 V vs. lithium. The interactions appear to destabilize the level and stabilize the level so as to make the energy accessible.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

3 ta iqtibos0 ta foydalanilgan manba