Comparison of Laminar Separation Bubble Measurements on a Low Reynolds Number Airfoil in Three Facilities

This paper describes a series of experiments on the SD7003 airfoil, conducted in three different facilities: a low-turbulence wind tunnel, a water tunnel, and a tow tank. An attempt was made to achieve commonality of model geometry, Reynolds number and test conditions, in order to directly compare the experimental results. The SD7003 airfoil was chosen because of its robust, thin laminar separation bubble, which challenges the capability of current Particle Image Velocimetry (PIV) methods to accurately resolve the near-wall flowfield. Chordwise locations of separation, reattachment, and transition were compared. Since the time-averaged bubble geometry is a strong function of the flowfield ambient turbulence level, comparison of bubble geometry gives some assessment of facility flow quality, and hence of facility suitability for low Reynolds number testing in general.

Hali tarjima qilinmagan