Maqola

Material Properties of the Mandibular Trabecular Bone

Éva LakatosDepartment of Structural Mechanics, Budapest University of Technology and Economics, Műegyetem Rakpart 3, Budapest 1111, HungaryLóránt MagyarDepartment of Forensic Medicine, Semmelweis University, Üllői út 93, Budapest 1091, HungaryImre BojtárDepartment of Structural Mechanics, Budapest University of Technology and Economics, Műegyetem Rakpart 3, Budapest 1111, Hungary

2014en

ABI

Annotatsiya

The present paper introduces a numerical simulation aided, experimental method for the measurement of Young's modulus of the trabecular substance in the human mandible. Compression tests were performed on fresh cadaveric samples containing trabecular bone covered with cortical layer, thus avoiding the destruction caused by the sterilization, preservation, and storage and the underestimation of the stiffness resulting from the individual failure of the trabeculae cut on the surfaces. The elastic modulus of the spongiosa was determined by the numerical simulation of each compression test using a specimen specific finite element model of each sample. The received mandibular trabecular bone Young's modulus values ranged from 6.9 to 199.5 MPa.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.1155/2014/470539

Iqtiboslar va manbalar

2 ta iqtibos0 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar