Maqola

Comparison of the Quality of Gas Equipmentat Metallurgical and Coke-ChemicalEnterprises and Production Plants

A.E. FilinDepartment of Technosphere Safety, National Research Technological University Moscow Institute of Steel and Alloys, Moscow, RussiaIrina KolbinaDepartment of Technosphere Safety, National Research Technological University Moscow Institute of Steel and Alloys, Moscow, RussiaAskar SeidaliyevDepartment of Ecology and Geology, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, KazakhstanAlexandr KolesnikovDepartment of Life Safety and Environmental Protection, M. Auezov South Kazakhstan University, Shymkent 160012, KazakhstanSamal SyrlybekkyzyDepartment of Ecology and Geology, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, KazakhstanBotagoz SuleimenovaDepartment of Ecology and Geology, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, KazakhstanLeila SeidaliyevaDepartment of Ecology and Geology, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, KazakhstanLazzat NurshakhanovaDepartment of Petrochemical Engineering, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, KazakhstanG. S. KenzhibayevaDepartment of Ecology, M. Auezov South Kazakhstan University, Shymkent 160012, KazakhstanAkhmetali KamshybayevDepartment of Water Resources, Land Use and Agricultural Engineering, M. Auezov South Kazakhstan University, Shymkent 160012, KazakhstanSymbat KoibakovaDepartment of Petrochemical Engineering, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, KazakhstanOlimpiada MankeshevaDepartment of Maritime Academy, Sh. Yessenov Caspian University of Technology and Engineering, 130002, Aktau, Kazakhstan

2024en

ABI

Annotatsiya

Gas at the metallurgical plant is distributed through gas control points. To date, on the territory of the Russian Federation and the CIS countries, the absence of a unified approved methodology for visual and measuring quality control of gas control points has been revealed. The lack of a unified methodology does not allow for a quick decision on the correct technology for assembling and welding a structural element, as well as subsequently preventing accidents and emergency situations, in turn, the requirements for the quality of structures and monitoring of emergency and emergency situations are provided for by the safety rules in the gas industry. Objects of metallurgical and coke chemical enterprises and production plants. The article studies and conducts comparative analyses of measures and procedures carried out during the preparation and conduct of visual and measuring control at metallurgical and coke chemical enterprises, where the permissible measurement error should be within 0.1-1.0 mm in order to ensure the safety of life and environmental protection.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.15244/pjoes/177442

Iqtiboslar va manbalar

2 ta iqtibos0 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar