Maqola

Multi-area Power System Load Frequency Control by using Model Predictive Control by Introducing Renewable Energy Sources

Lei LiuDepartment of Electrical and Electronics Engineering, University of the Ryukyus, Okinawa, JapanTakeyoshi KatoInstitute of Materials and Systems for Sustainability Nagoya University, Furo-cho, Chikusa-ku, Nagoya, JapanParas MandalDepartment of Electrical and Computer Engineering, The University of Texas at EI Paso, Texas, TX, USAAlexey MikhaylovFinancial University under the Government of the Russian Federation University of the Ryukyus, Moscow, Russian FederationAshraf Mohamed HemeidaElectrical Engineering Department, Faculty of Energy Engineering, Aswan University, EgyptTomonobu SenjyuDepartment of Electrical and Electronics Engineering, University of the Ryukyus, Okinawa, Japan

2021en

ABI

Annotatsiya

In this work, we had proposed a load frequency control scheme by applying Model Predictive Control(MPC) in a three-area isolated power system, which including thermal generation, photovoltaic generation(PV), Wind Generation(WG) and storage battery by using local terminal information. [1] And base on the model, we had examined the muti-area system load frequency control approach effectiveness and robustness. In this step, we had built a multi-area model by which applied MPC and no MPC, to examine the system stability by analysis these two cases simulation results. And more importantly is, it laid the foundation for the next step of research. In the future work, we would like to connect the each part of this muti-area system, and by considering the tie-power to make a two step MPC control scheme. All the simulations are performed in Matlab®/Simulink®.

Hali tarjima qilinmagan

Identifikatorlar

DOI: 10.1109/icsct53883.2021.9642521

Iqtiboslar va manbalar

3 ta iqtibos0 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar