On the mechanism of running-in during wear tests of a babbitt B83
A. Kh. ValeevaInstitute for Metals Superplasticity Problems, Russian Academy of Science, ul. St. Khalturina 39, Ufa, 450001, RussiaI. Sh. ValeevInstitute for Metals Superplasticity Problems, Russian Academy of Science, ul. St. Khalturina 39, Ufa, 450001, RussiaR. F. FazlyakhmetovInstitute for Metals Superplasticity Problems, Russian Academy of Science, ul. St. Khalturina 39, Ufa, 450001, RussiaA. I. PshenichnyukInstitute for Metals Superplasticity Problems, Russian Academy of Science, ul. St. Khalturina 39, Ufa, 450001, Russia
2015en
ABI
Annotatsiya
Based on an analysis of changes in the structure of cast babbitt of grade B83 in the process of wear tests and on a comparison of the wear curves of cast babbitt and electroplated coating of the same phase composition, there is proposed a wear mechanism at the running-in stage of B83, which is reduced to the spalling-off of coarse particles of the intermetallic β phase, pressing-in of the cleaved particles into the soft plastic matrix, and the formation of a fairly homogeneous coating uniformly paved by small, hard particles.
Hali tarjima qilinmagan
Identifikatorlar
Iqtiboslar va manbalar
2 ta iqtibos0 ta foydalanilgan manba