Development of Solid Phase Extraction Method Based on Ion Imprinted Polymer for Determination of Cr(III) Ions by ETAAS in Waters

In this work, a new solid phase extraction method for the determination of chromium species in water samples by electrothermal atomic absorption spectrometry was developed. For selective separation of Cr(III) ions under dynamic conditions, two ion imprinted polymers containing Cr(III)-1,10-phenanthroline complex (Cr(III)-phen) were prepared with the use of one (styrene, ST) or two (styrene and 4-vinylpyridine, ST-4VP) functional monomers. The physicochemical properties of those solid sorbents towards Cr(III) ions were studied and compared. It was found that Cr(III) ions were retained on the Cr(III)-phen-ST and Cr(III)-phen-ST-4VP polymers with high efficiency and repeatability (91.6% and 92.9%, RSD < 2%) from solutions at pH 4.5. The quantitative recovery of the analyte (91.7% and 93.9%, RSD < 4%) was obtained with 0.1 mol/L EDTA solution. The introduction of 4VP, an additional functional monomer, improved selectivity of the Cr(III)-phen-ST-4VP polymer towards Cr(III) ions in the presence of Cu(II), Mn(II) and Fe(III) ions, and slightly decreased the sorption capacity and stability of that polymer. The accuracy of procedures based on both polymeric sorbents was proved by analyzing the standard reference material of surface water SRM 1643e. The method using the Cr(III)-phen-ST polymer was applied for determining of Cr(III) ions in tap water and infusion of a green tea.

Hali tarjima qilinmagan