Works cited by this work

85 works

Work: Metrological Comparison of Available Methods to Correct Edge-Effect Local Plasticity in Instrumented Indentation Test

Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
W. C. Oliver, George M. Pharr
Article20046 citations
ABI
Single-step calibration method for nano indentation testing machines
Maurizio Galetto, Gianfranco Genta, Giacomo Maculotti
Article20204 citations
ABI
Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation
Yang‐Tse Cheng, Che-Min Cheng
Article19983 citations
ABI
Nanoindentation: Measuring methods and applications
D.A. Lucca, Konrad Herrmann, M.J. Klopfstein
Article20103 citations
ABI
Indentation size effects in crystalline materials: A law for strain gradient plasticity
William D. Nix, Huajian Gao
Article19983 citations
ABI
A comparison of nanoindentation pile-up in bulk materials and thin films
Noushin Moharrami, S.J. Bull
Article20143 citations
ABI
Uncertainty evaluation of indentation modulus in the nano-range: Contact stiffness contribution
Giulio Barbato, Gianfranco Genta, Roberto Cagliero +4
Article20173 citations
ABI
Instrumented Indentation Test in the Nano-range: Performances Comparison of Testing Machines Calibration Methods
Maurizio Galetto, Giacomo Maculotti, Gianfranco Genta +2
Article20193 citations
ABI
Germanium: A review of its US demand, uses, resources, chemistry, and separation technologies
Madhav Patel, Athanasios K. Karamalidis
Review article20213 citations
ABI
High-Precision Calibration of Indenter Area Function and Instrument Compliance
T. Chudoba, Dieter Schwenk, Philipp Reinstädt +1
Article20223 citations
ABI
Calibration of machine platform nonlinearity in Instrumented Indentation Test in the macro range
Jasurkhuja Kholkhujaev, Giacomo Maculotti, Gianfranco Genta +1
ArticleMetal and Thin Film MechanicsPrecision Engineering20233 citations
ABI
Electrode materials for lithium-ion batteries
Amit Kumar Mishra, Akansha Mehta, Soumen Basu +5
Article20182 citations
ABI
Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test
Giacomo Maculotti, Edoardo Goti, Gianfranco Genta +2
Article20212 citations
ABI
Mapping of mechanical properties of WC–Co using nanoindentation
Håkan Engqvist, Urban Wiklund
Article20002 citations
ABI
Indentation of self-similar indenters: An FEM-assisted energy-based analysis
Fabian Pöhl, S. Huth, W. Theisen
Article20142 citations
ABI
Electrical resistance of metallic contacts on silicon and germanium during indentation
George M. Pharr, W. C. Oliver, Robert F. Cook +4
Article19922 citations
ABI
Exploiting interactions between structure size and indentation size effects to determine the characteristic dimension of nano-structured materials by indentation
Xiaodong Hou, N.M. Jennett, Magdalena Parlińska‐Wojtan
Article20132 citations
ABI
Investigations of new possibilities in the calibration of diamond hardness indenters geometry
Alessandro Germak, Claudio Origlia
Article20102 citations
ABI
The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations
George M. Pharr, Erik G. Herbert, Yanfei Gao
Article20102 citations
ABI
Correction of the hardness measurement for pile-up materials with a nano indentation machine
Moon Shik Park
Article20162 citations
ABI
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano-range
Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +3
Article20182 citations
ABI
Assessment of Heat Treatment Effect on AlSi10Mg by Selective Laser Melting through Indentation Testing
Giacomo Maculotti, Gianfranco Genta, Massimo Lorusso +1
Article20192 citations
ABI
Metrological characteristics for the calibration of surface topography measuring instruments: a review
Richard Leach, Han Haitjema, Rong Su +1
Review article20202 citations
ABI
Untitled
Other2 citations
ABI
Untitled
Other1 citations
ABI