Pulling resistance of the front plow cornercutter
Sherzod KurbаnovKarshi Engineering-Economics Institute, Karshi, UzbekistanIsroil TemirovKarshi Engineering-Economics Institute, Karshi, UzbekistanYorkinoy KhashimovaTashkent State Pedagogical University, Tashkent, UzbekistanParakhat BerdimuratovTashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, UzbekistanSaid YuldoshevKarshi Institute of Irrigation and Agro technologies of theNational Research University Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Karshi, Uzbekistan
ABI
Abstract
When installed on the frontal plow, the bodies will work in conditions of semi-blocked cutting. The purpose of the study is the theoretical determination of the traction resistance of the frontal plough's cornercutter. The basic principles and methods of classical mechanics, mathematical analysis and statistics were used in this study. Analytical equations for determination of traction resistance of cornercutter beam and plough have been obtained. It is established that traction resistance of frontal plough corners depends on cornersner and plough parameters as well as on physical-mechanical soil properties. At speeds of 1.8-2.3 m/s, traction resistance of the corrugated plough is 0.36-0.39 kN.
Topics
Identifiers
Citations and references
Metrics — AkademScholar · Coming soon