Статья

Soil Fragmentation, Surface Roughness and Draft Force in Chisel Tillage with a Toothed Roller: Experimental and Analytical Study

Yurii SyromiatnykovDepartment of Fruit and Vegetable Growing and Viticulture, Institute of Agrobiotechnologies and Food Safety, Samarkand State University Named After Sharof Rashidov, Samarkand 140104, UzbekistanFarmon MamatovDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanSherzod KurbаnovDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanMakhmatmurod ShomirzaevDepartment of Technological Education, Termez State University, Termez 190111, UzbekistanAsroriddin KasimovDepartment of Technological Education, Termez State University, Termez 190111, UzbekistanI.S. KhasanovDepartment of Agricultural and Water Management Techniques and Technologies, Bukhara State Technical University, Bukhara 200100, UzbekistanDilsabo ChoriyevaDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanMuxtor KhalilovDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanSamar OchilovDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanSunatullo BadalovDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanMuhriddin BurievDepartment of Agricultural Engineering, Karshi State Technical University, Karshi 180100, UzbekistanShahnoza AbduganiyevaDepartment of Agricultural Techniques and Technologies, Faculty of Agricultural Mechanization, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers (TIIAME), National Research University, Tashkent 100000, UzbekistanSevara AlikulovaDepartment of Agricultural Engineering, Faculty of Mechatronics and Engineering, State Biotechnological University, 61002 Kharkiv, Ukraine

Agriculturejournal2026en

ABI

Аннотация

Efficient seedbed preparation under conservation-oriented tillage requires balanced aggregate fragmentation, surface microrelief and energy demand. This study investigated the influence of passive toothed roller parameters on soil fragmentation, surface roughness, draft force and fuel consumption during chisel tillage under medium-loam Calcisol conditions. Three configurations were compared: a chisel plow without a roller, with a slat roller and with a toothed roller. An analytical framework describing aggregate capture, tooth–soil contact frequency and resistance formation was combined with field experiments and regression-based response surface analysis. The toothed roller improved measured soil treatment indicators compared with the no-roller and slat-roller configurations due to discrete tooth–soil interaction, localized stress concentration and repeated loading of loosened aggregates. Rational parameter ranges were identified: a roller diameter of 0.45–0.46 m, 13–15 teeth, transverse spacing of 8.0–8.6 cm, a tooth height of 7.5–8.5 cm and specific load of 0.9–1.1 kN m−1. Under the selected configuration, aggregates smaller than 50 mm increased from 76.1% to 88.0%, surface roughness decreased from 6.8 to 3.7 cm and residue retention remained above 60%. Fuel consumption increased to 28.4–28.5 L ha−1, reflecting the additional energetic cost of fragmentation and levelling. The approach supports rational selection of passive toothed roller parameters under the tested conditions.

Темы

Soil Mechanics and Vehicle Dynamics Soil Management and Crop Yield Soil Carbon and Nitrogen Dynamics

Идентификаторы

DOI: 10.3390/agriculture16121260

Цитирования и источники

Цитирований: 0Использованных источников: 27

Показатели — AkademScholar · Скоро