Filtering errors in primary sensor signals
O A JumaevNavoi State University of Mining and Technologies, Department of Automation and Control, Energy-mechanics faculty, Navoi, 210100, UzbekistanMuhriddin IsmoilovNavoi State University of Mining and Technologies, Department of Automation and Control, Energy-mechanics faculty, Navoi, 210100, Uzbekistan
ABI
Аннотация
Sensors are used in the primary measurement of signals. When signals in the sensor are transmitted to the next device, there is an occurrence of errors due to various effects. Filters are used to eliminate the errors that have occurred. Depending on the frequency nature of the signals, there are high pass filters and low pass filters. We select the filters according to the frequency range of the signal. It is observed that the measurement result is different from the actual value if the signal is not filtered. This article analyzes the errors that occur when signals are processed. In time discretization, the state of the signal spectrum is considered. The cause of the appearance of errors has been studied.
Мавзулар
Идентификаторлар
Иқтибослар ва манбалар
Кўрсаткичлар — AkademScholar · Тез орада