Asosiy kontentga oʻtish
AkademIndex

Mahsulotlar

Ishlab chiquvchilar uchun

AkademBaseEkotizim uchun ochiq API

Nodirjon Tursunov

37 ta ish

Tashkent State Transport University, Tashkent, Uzbekistan

  1. Development of production technology of rolling stock cast parts

    Otabek Toirov, Nodirjon Tursunov

    MaqolaIndustrial Engineering and TechnologiesE3S Web of Conferences202144 iqtibos
    ABI

  2. Effect of different additives on the physical and mechanical properties of liquid-glass core mixtures

    Lochinbek Kuchkorov, Shavkat Alimukhamedov, Nodirjon Tursunov +1

    MaqolaInnovations in Concrete and Construction MaterialsE3S Web of Conferences202330 iqtibos
    ABI

  3. Improvement of the out-of-furnace steel treatment technology for improving its mechanical properties

    Otabek Toirov, Nodirjon Tursunov, Shavkat Alimukhamedov +1

    MaqolaMaterial Properties and ApplicationsE3S Web of Conferences202325 iqtibos
    ABI

  4. Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron

    Murot Turakulov, Nodirjon Tursunov, Shavkat Alimukhamedov

    MaqolaEngineering Technology and MethodologiesE3S Web of Conferences202319 iqtibos
    ABI

  5. Efficiency of using heat-insulating mixtures to reduce defects of critical parts

    Otabek Toirov, Nodirjon Tursunov

    MaqolaMaterial Properties and ApplicationsE3S Web of Conferences202313 iqtibos
    ABI

  6. Study of the operational properties of the bolster of a freight car bogie

    Dilmira Valieva, Salokhiddin Yunusov, Nodirjon Tursunov

    MaqolaRailway Engineering and DynamicsE3S Web of Conferences202313 iqtibos
    ABI

  7. Development of technology for high-strength cast iron for manufacturing D49 head of cylinder

    Uchkun Rakhimov, Nodirjon Tursunov

    MaqolaMaterial Properties and ApplicationsE3S Web of Conferences202312 iqtibos
    ABI

  8. New concept of cast iron melting technology in induction crucible furnace

    Murot Turakulov, Nodirjon Tursunov, Salokhiddin Yunusov

    MaqolaMaterial Properties and ApplicationsE3S Web of Conferences202312 iqtibos
    ABI

  9. Investigation of heat exchange processes in the lining of induction furnaces

    Tokhir Tursunov, Nodirjon Tursunov, Talgat Urazbayev

    MaqolaInduction Heating and Inverter TechnologyE3S Web of Conferences202311 iqtibos
    ABI

  10. Steel modification modes for improving the cast parts quality of the rolling stock couplers

    Talgat Urazbayev, Nodirjon Tursunov, Tokhir Tursunov

    MaqolaMetal Alloys Wear and PropertiesAIP conference proceedings202410 iqtibos
    ABI

  11. Steeling of synthetic cast iron in induction crucible furnace taking into account consumption rate of carburizers

    Murot Turakulov, Nodirjon Tursunov, Salokhiddin Yunusov

    MaqolaMaterial Properties and ApplicationsE3S Web of Conferences202310 iqtibos
    ABI

  12. Improving physical and mechanical properties of bentonite clay from Navbahar clay deposit

    Lochinbek Kuchkorov, Nodirjon Tursunov, Anna Avdeeva

    MaqolaMechanical Systems and EngineeringE3S Web of Conferences20236 iqtibos
    ABI

  13. Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils Using h-BN Nanoparticle Additives: A Tribological Study

    Umida Ziyamukhamedova, Shah Wasil, Sanjay Kumar +5

    MaqolaLubricants and Their AdditivesLubricants20246 iqtibos
    ABI

  14. Improvement of production technology for spheroidal graphite cast iron with increased strength

    Uchkun Rakhimov, Nodirjon Tursunov, Shukurali Tursunov

    MaqolaMaterial Properties and ApplicationsAIP conference proceedings20246 iqtibos
    ABI

  15. Recent Progress in Particulate Reinforced Copper‐Based Composites: Fabrication, Microstructure, Mechanical, and Tribological Properties—A Review

    Chandra Shekhar, M.F. Wàňi, Rakesh Sehgal +3

    MaqolaAluminum Alloys Composites PropertiesAdvanced Engineering Materials20244 iqtibos
    ABI

  16. Microstructure, mechanical and tribological characterization of magnetron sputtering ZrN and ZrAlN coatings

    Nodirjon Tursunov, Sheikh Shahid Saleem, Umida Ziyamukhamedova +3

    MaqolaMetal and Thin Film MechanicsTribology International20243 iqtibos
    ABI

  17. A Novel Ceramic Reinforced Metal Matrix Composite (Cu–Ni/TiC–CaF2): Fabrication, Microstructure, Mechanical and Tribological Characterization

    Chandra Shekhar, M.F. Wàňi, Rakesh Sehgal +2

    MaqolaAluminum Alloys Composites PropertiesMetallurgical and Materials Transactions B20252 iqtibos
    ABI

  18. Development of resource-saving composition of sand-clay mixtures for steel castings with improved physical and chemical characteristics

    Otabek Toirov, Nodirjon Tursunov, Lochinbek Kuchkorov

    MaqolaIndustrial Engineering and TechnologiesVibroengineering PROCEDIA20252 iqtibos
    ABI

  19. Experimental and theoretical study of the efficiency of solid slag mixtures for desulfurization of 20GL steel under conditions of induction crucible melting

    Nodirjon Tursunov, Azizjon Saidirakhimov, Otabek Toirov

    MaqolaMaterial Properties and ApplicationsVibroengineering PROCEDIA20252 iqtibos
    ABI

  20. Analysis of heat treatment parameters of 60Si2CrV steel to enhance the mechanical properties of elastic structural elements

    Salokhiddin Absattarov, Nodirjon Tursunov, Otabek Toirov

    MaqolaMicrostructure and Mechanical Properties of SteelsVibroengineering PROCEDIA20252 iqtibos
    ABI

  21. Enhancing the mechanical and functional characteristics of structural spring steel through the advancement of heat treatment technologies

    Nodirjon Tursunov, Salokhiddin Absattarov, Makhmudova Dilfuza Abdulazizovna

    MaqolaMicrostructure and Mechanical Properties of SteelsVibroengineering PROCEDIA20251 iqtibos
    ABI

  22. Research of the influence of the technological parameters of the steelmaking process on the design and defect formation of large-sized castings for freight cars

    Otabek Toirov, Nodirjon Tursunov

    MaqolaDiverse Industrial Engineering TechnologiesVibroengineering PROCEDIA20251 iqtibos
    ABI

  23. Electronic tricroscopic examination of the structure of the Ti-50.2 at. % Ni alloy

    Н. У. Абдураимова, Yu. N. Mansurov, Nodirjon Tursunov +1

    MaqolaIntermetallics and Advanced Alloy PropertiesE3S Web of Conferences20210 iqtibos
    ABI

  24. ASPECTS OF THE FRICTIONAL MATERIALS APPLICATION FOR THE MACHINERY PARTS

    Alimjon Riskulov, Sh.P. Alimukhamedov, Nodirjon Tursunov +3

    MaqolaAdvanced machining processes and optimizationТеория и практика современной науки20220 iqtibos
    ABI

  25. ALLOYS WITH SPECIFIED LINEAR EXPANSION COEFFICIENT FOR THE MACHINERY PARTS

    Alimjon Riskulov, Sh.P. Alimukhamedov, Nodirjon Tursunov +3

    MaqolaEngineering Technology and MethodologiesТеория и практика современной науки20220 iqtibos
    ABI