Asosiy kontentga oʻtish
Maqola

Research on the Influence of Technological Parameters and the Physicochemical Properties of the C

Sayyora MatsalayevaKarakalpak State University , Nukus , Karakalpakstan , 230100 , UzbekistanShukrullo BabasodikovAcademy of Sciences of the Republic of Uzbekistan , 100170 , Tashkent , UzbekistanAxmed ReymovKarakalpak State University , Nukus , Karakalpakstan , 230100 , UzbekistanB. Kh. KucharovInstitute of General and Inorganic Chemistry of theAktam ErkayevTashkent Institute of Chemical Technology , 100011 , Tashkent , UzbekistanDavron AbdisattorovAlmalyk State Technical Institute , Almalyk , 110100 , UzbekistanBakhodir AbdullayevUniversity of Economics and Pedagogy , Karshi , 106959 , Uzbekistan
2026en
ABI

Annotatsiya

This article presents the results of a study on the influence of technological parameters on the physicochemical properties of the EDTA-4Na - FeCl3 - H2O system within a wide range of selected technological parameters. Specifically, the effect of the concentration of FeCl3 solutions and their ratio relative to EDTA-4Na was investigated. It was found that with an increase in the EDTA-4Na ratio, the system's pH increases from 1.271 - 1.608 to 2.938 - 4.117 and 6.426 - 7.795. Furthermore, with an increase in FeCl3 concentration at a constant ratio, a slight decrease in pH is observed up to 30%, followed by a sharp increase at 40%. Further increase in FeCl3 concentration leads to a slight decrease. This pattern is consistent across all ratios. The pH difference of the system when using 30% and 10% FeCl3 solutions is 0.216, 2.89, and 1.327 at ratios of 50, 100, and 150%, respectively.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

0 ta iqtibos0 ta foydalanilgan manba