Asosiy kontentga oʻtish
Maqola

Structural Quality of Directly Bonded Silicon Wafers with Regularly Grooved Interfaces

E. D. KimPower Semiconductor Research Laboratory, Korea Electrotechnology Research Institute, Changwon, 641‐600 Gyongnam, KoreaS. C. KimPower Semiconductor Research Laboratory, Korea Electrotechnology Research Institute, Changwon, 641‐600 Gyongnam, KoreaJ. M. ParkPower Semiconductor Research Laboratory, Korea Electrotechnology Research Institute, Changwon, 641‐600 Gyongnam, KoreaI. V. GrekhovPower Semiconductor Research Laboratory, Korea Electrotechnology Research Institute, Changwon, 641‐600 Gyongnam, KoreaT. S. ArgunovaIoffe Physico‐Technical Institute, St. Petersburg 194021, RussiaL. S. KostinaPower Semiconductor Research Laboratory, Korea Electrotechnology Research Institute, Changwon, 641‐600 Gyongnam, KoreaT.V. KudryavtzevaIoffe Physico‐Technical Institute, St. Petersburg 194021, Russia
1997en
ABI

Annotatsiya

The role of a regularly grooved pattern on a silicon wafer surface to be bonded was studied from the viewpoint of interfacial properties and structural quality of directly bonded silicon wafers by using x‐ray topography and scanning electron microscope techniques. The presence of the grooves resulted in a decrease in the dislocation density at the interface as well as in the crystal bulk, which can be explained by the dislocation‐collection capability of the grooves. Successful bonding, not only between strongly misoriented silicon wafers, but even between (001) and (111) wafers could be achieved. The grooves were eventually flattened during a suitable annealing by the aid of the dislocation migration to their free surfaces. Large voids, originating from disbonded boundaries and provoked by entrapped gases, could also be removed by annealing. Measured I‐V characteristics of p‐n diodes verified the reliability of the modified structures.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar

2 ta iqtibos0 ta foydalanilgan manba