Vibrations of Cylindrical Shell Structures Filled With Layered Viscoelastic Material
Annotatsiya
A thin-walled shell and a thick-walled mass (cylinder) in contact with it, made of a different material, are structural elements of many machines, apparatus, and structures. The paper considers forced steady-state vibrations of cylindrical shell structures filled with a layered viscoelastic material. The study aims to determine the damping properties of vibrations of a structurally inhomogeneous cylindrical mechanical system under the influence of harmonic loads. The dynamic stress-strain state of a three-layer cylindrical shell filled with a viscoelastic material under the action of internal time-harmonic pressure is investigated. The oscillatory processes of the filler and the bonded shell satisfy the Lamé equations. At the contact between the shell and the filler, the rigid contact conditions are satisfied. Dependences between stresses and strains for a linear viscoelastic material are presented in the form of the Boltzmann-Voltaire integral. The method of separation of variables, the method of the theory of potential functions (special functions), and the Gauss method are used to solve this problem. Based on the analysis of the numerical results, it was found that the dependence of the resonant amplitude of the shell displacements on the viscous properties of the filler is 12-15%. Analysis of the results obtained shows that the study of vibrations of shells containing fillers according to the rod theory will lead to rather large erroneous results (up to 20%).