Maqola

Filtration velocity under roller squeezing

Shavkat KhurramovTashkent Institute of Architecture and Civil Engineering, 13, Navoi, Tashkent, UzbekistanFarkhod KhalturaevTashkent Institute of Architecture and Civil Engineering, 13, Navoi, Tashkent, UzbekistanF.Z. KurbanovaTashkent Institute of Architecture and Civil Engineering, 13, Navoi, Tashkent, Uzbekistan

E3S Web of Conferencesjournal2023en

ABI

Annotatsiya

Analytical dependencies are determined that describe the patterns of change in filtration rates in the squeezing area. It was established that the fluid filtration rate along the abscissa axis at the boundaries of the compression zone is zero, and inside the zone, it takes negative values. It was found that the fluid filtration rates along the ordinate axis are zero at the beginning of the compression zone; they increase to a maximum at a point lying on the line of centers, and in the zone of strain restoration, they depend on the angle that determines the position of the point where the fluid changes direction.

Mavzular

Geotechnical and Geomechanical Engineering Mineral Processing and Grinding Drilling and Well Engineering

Identifikatorlar

DOI: 10.1051/e3sconf/202337601053

Iqtiboslar va manbalar

21 ta iqtibos 8 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar · Tez orada