Maqola

Parameters of the main working part of the universal device of dry fruit bites

Akbar KhurramovChirchik higher tank command engineering school, 15 Amir Temur str., Tashkent region, 111718, UzbekistanS AbdurayimovChirchik higher tank command engineering school, 15 Amir Temur str., Tashkent region, 111718, UzbekistanNurmukhammad KuzibekovChirchik higher tank command engineering school, 15 Amir Temur str., Tashkent region, 111718, UzbekistanIslom MullajonovChirchik higher tank command engineering school, 15 Amir Temur str., Tashkent region, 111718, UzbekistanNodir KholiqovChirchik higher tank command engineering school, 15 Amir Temur str., Tashkent region, 111718, UzbekistanKhalilov Sherali

IOP Conference Series Earth and Environmental Scienceconference2023en

ABI

Annotatsiya

Abstract In the article, based on our development of a universal oil extraction device and the need to apply it for use in the Armed Forces and the people’s food industry, the diameter of the gear shafts, which are the main working part of the device, is the number of rotations, based on the diameter of its ribs, in order for us to correctly select the material of its most convenient lightning-tooth shafts, it is possible to find that the experiments were carried out on the Lightning-tooth shafts made of three different types of materials, as well as the result of which, with the help of empirical expressions, we can find that the, at the same time it was mentioned that in rubber and wood surface tooth shafts, the degree of damage and bite duration of the shafts was lower than in steel surface tooth shaft, and because of the resistance of steel surfaces to friction coefficient, the Lightning tooth shafts were found to have a higher useful working coefficient.

Hali tarjima qilinmagan

Mavzular

Plant Surface Properties and Treatments Advanced Combustion Engine Technologies

Identifikatorlar

DOI: 10.1088/1755-1315/1231/1/012035

Iqtiboslar va manbalar

0 ta iqtibos21 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar · Tez orada