Maqola

Comparison of turbulence models for two-phase flow in a centrifugal separator

Erkin MadalievFergana Polytechnic Institute, Fergana, UzbekistanMurodil MadalievFergana Polytechnic Institute, Fergana, UzbekistanK. AdilovTashkent State Transport University, Tashkent, UzbekistanT. R. PulatovTurin Polytechnic University, Tashkent, Uzbekistan

E3S Web of Conferencesjournal2021en

ABI

Annotatsiya

The numerical results of mathematical modeling of a two-phase, axisymmetric swirling turbulent flow in the separation zone of a centrifugal separator are presented. The movement of the carrier gas flow was modeled using RANS, which were closed using the SARC turbulence models, the SST-RC model, and the SSG/LRR-RSM-w2012 model. For the numerical solution of the problem, the SIMPLE algorithm was used. The article compares the results of numerical calculation of turbulence models. The results of a comparison of numerical calculations with allowance for the effect of the solid phase on the dynamics of the air medium and without taking it into account with experimental data are presented.

Mavzular

Cyclone Separators and Fluid Dynamics Coal Combustion and Slurry Processing Particle Dynamics in Fluid Flows

Identifikatorlar

DOI: 10.1051/e3sconf/202126401009

Iqtiboslar va manbalar

24 ta iqtibos 18 ta foydalanilgan manba

Koʻrsatkichlar — AkademScholar · Tez orada