Asosiy kontentga oʻtish
Boshqa

Sentaurus TCAD project files for: Height-dependent efficiency of silicon two-junction vertical solar cells for micro-concentrator photovoltaics: a TCAD study

A. É. AtamuratovUrgench State University named after Abu Rayhan BiruniJumaboev BekhzodUrgench State University named after Abu Rayhan BiruniAhmed YusupovTashkent International University of EducationKhaitbaev EldorbekUrgench State University named after Abu Rayhan BiruniM. M. KhalilloevUrgench State University named after Abu Rayhan BiruniAsror KhasanovUrgench State University named after Abu Rayhan BiruniShirin RaxmonovaUrgench State University named after Abu Rayhan BiruniKhushnudbek SaparovUrgench State University named after Abu Rayhan BiruniJean Chamberlain ChedjouUniversity of Klagenfurt
2026en
Ochiq kirishYashil

Litsenziya: cc-by

ABI

Annotatsiya

Sentaurus TCAD project files supporting the article "Height-dependent efficiency of silicon two-junction vertical solar cells for micro-concentrator photovoltaics: a TCAD study". The study analyses a silicon vertical two-junction solar cell (V2JSC) with a tunnel-junction interconnect by two-dimensional TCAD simulation with ray tracing under the AM1.5G spectrum, for structure heights of 5–600 µm, base doping levels of 1013–5×1016 cm−3 and concentrations up to 104 suns. The model is calibrated against measured characteristics of a silicon vertical multijunction cell (Sater and Sater, 2002) between 100 and 2480 suns. Contents (VMJ_solar_cells_projects.zip, two Sentaurus Workbench projects): 2_pn_Si_metal_bog_kolibrovka2_RayTracing – two-junction cell with a metal interconnect, used for calibration against the measured vertical multijunction cell (figures 2 and 3 of the article). 2pn_Si_orasida_YTDPath_RayTracing_kolibrovka_Rs_ozgaruvchi_TJwithtrap – two-junction cell with a p++/n++ tunnel-junction interconnect (band-to-band tunneling, trap-assisted tunneling), used for the height, base-doping and concentration studies (figures 4–10). Each project contains the Sentaurus Structure Editor and Sentaurus Device command files (*.cmd, *.scm), material parameter files (*.par), the AM1.5G and other spectra used for ray tracing, simulation logs and the resulting current–voltage curves (*.plt) and device files (*.tdr). Simulations were performed with Synopsys Sentaurus TCAD version O-2018.06 at 300 K (isothermal). The measured reference data are not included; they are taken from B. L. Sater and N. D. Sater, Proc. 29th IEEE PVSC (2002), https://doi.org/10.1109/PVSC.2002.1190778.

Hali tarjima qilinmagan

Identifikatorlar

Iqtiboslar va manbalar